There are several differences between Wet and Dry Sprinkler systems. The National Fire Protection Association (N.F.P.A) explains the main differences:
When designing a sprinkler system one of the first decisions a designer has to make is what type of sprinkler system should be installed. When selecting the appropriate sprinkler system type it is important to first understand the differences between the systems and then to understand how these differences can be beneficial, or detrimental, under certain conditions. Selecting the wrong system type can be costly.
Wet Sprinkler Systems:
They are the most common type of sprinklers. In this system, the sprinkler piping is constantly filled with water. When the temperature at the ceiling gets hot enough the glass bulb or fusible link in a sprinkler will break. Since the system is already filled with water, water is free to flow out of that sprinkler head. Contrary to what Hollywood would have you think, not all sprinkler heads will operate at once in this type of system. The temperature around that specific sprinkler head needs to be high enough to break the glass bulb or fusible link that is holding water back. Once that happens, water will immediately start flowing from only that head. Wet pipe sprinkler systems are the most reliable and cost effective. Therefore, they should be the first type considered when selecting a sprinkler system. However, there are times when a wet pipe sprinkler system may not be appropriate. One of the major factors in determining if a wet pipe system can be used is if the temperature of the space can be maintained above freezing.
Dry Sprinkler Systems:
These are very similar to wet pipe systems with one major difference. The pipe is not constantly filled with water. Instead, the water is held behind a dry pipe valve, usually some distance away from where the sprinklers are located. Like a wet pipe system, when the temperature at the ceiling becomes hot enough, the glass bulb or fusible link of the sprinkler breaks. However, in this case, water isn’t immediately available because the pipe is not water filled. Instead, air is released from the now open sprinkler head. This creates a drop in pressure causing the dry pipe valve to open and water to fill the system. Water will then flow from the open sprinkler head. A dry pipe system is a great option for locations where the temperature of the space cannot be guaranteed to be high enough to prevent water in the system from freezing.
Each system type has its own unique benefits. It is important to consider the pros and cons of each system type when selecting which sprinkler system is appropriate for your specific environment. An entire building may be protected with a combination of systems. For example, portions of a building that are temperature controlled can have a wet pipe system and use dry pipe systems in the areas that are not temperature controlled and that are subject to freezing conditions, like balconies, garages or places that are not insulated. Combining different types of systems for full building protection allows the designer to consider each unique environment and apply the most appropriate system type to that space without sacrificing what is best for other areas of the building.
The author of this content cannot be liable for any use or misuse of the contents. This is a guideline and is meant for information only.
